This is useful when/if you are going to make your own cable and attach to your OSD.
I measured the 2.5mm Component connectors with my multimeter – here is the diagram
2.5mm
4. common ground
3. center red connector
2. center blue connector
1. center green connector
I measured the 2.5mm Composite connectors with my multimeter – here is the diagram
2.5mm
4. common ground
3. center yellow connector
2. center white connector
1. center red connector
A 90 degree 2.5mm 4 Conductor Plug can be purchased from THIS site
[ad#Google Adsense]
5 comments
1 ping
Skip to comment form ↓
Tim
December 7, 2010 at 11:39 (UTC 2) Link to this comment
Tjena,
vet du var man hittar 2.5mm pluggar med 4poler?
Jag hittar bara sånna som 3,5mm
MVH
// Tim
UndCon
December 7, 2010 at 11:44 (UTC 2) Link to this comment
Hej!
kolla här:
http://readymaderc.com/store/index.php?main_page=product_info&cPath=11_29&products_id=168
/UndCon
Tim
December 7, 2010 at 18:13 (UTC 2) Link to this comment
Tackar så mycket… blir nog en eller 2 sådana..
Noname
May 23, 2011 at 18:45 (UTC 2) Link to this comment
Here are some headset-cables which have 2.5mm 4 pole connectors that also should work.
- 19kr http://www.24.se/motorola-25mm-stereohandsfree-chyn4516s-p-10620-c-299.aspx
- 19kr http://www.24.se/ljudadapter-25mm–35mm-p-1886-c-786.aspx
- 69kr http://www.24.se/ljudadapter-25mm-till-nokia-p-8246-c-200.aspx
Cheers
UndCon
May 23, 2011 at 20:01 (UTC 2) Link to this comment
Hi!
Thanks for the links.
24.se has their main office in my town
//UndCon
GoPro FPV pod » UndCon
October 4, 2011 at 21:09 (UTC 2) Link to this comment
[...] done with the help of the pinout I made earlier and the NIR FPV [...]