Apr 25

Skywalker groundstation recording

I used a Videograbber to record the output from my eagle Tree Groundstation. I flew LOS (Line Of Sight) i.e. without video goggles. It was a nice evening and the sun was setting as can be seen in the video below.

I still use stock antennas as I want to learn the limitations with them – when I change to CloverLeafs the noice will disappear. The crash at the end caused only damage to the canopy-holder and the video connector to be pulled out of the Eagle Tree OSD hence lost signal.

Video not available


    • Ludde on May 2, 2011 at 10:48

    Gör saw modden på mottagaren eller köp en lawmate motagare istället, men saw modden gör mottagaren klart bättre standard, funkar på alla dom där med 12-8ch med display

  1. Hej!

    Jag har ett nytt SAW-filter liggande och tar till det om det behövs. Lite lättare att göra antenner i dagsläget. Behöver låna en större lödkolv för att få loss det gamla SAW-filtret

  2. Another interesting thing I think I forgot to mention in this test is the fact that I pointed the RX antenna in the direction of most of this flight (see groundstation in start of video)


Comments have been disabled.