I was asked to explain how I did the LED modifications. Here are more images to show how the LED-strips are inserted into the foam.
The winglet LED’s (red and green) are mounted with the supplied sticky-tape this way the red and green does not make the foam glow but they are more directional. This improves visibility in air as it clearly tells me where I’m going. The white LED’s are there to make the whole wing glow.
-
- 1 Inserted and 1 lying on foam
-
- Wires in foam
-
- The strip is mounted vertically in the foam like this
-
- A winglet
-
- more winglet
-
- Wire between white and winglet
-
- Without flash
-
- Without flash
-
- Without flash
2 comments
Mikael Wingård
January 17, 2012 at 22:13 (UTC 2)
Ville bara säga att du är omnämnd i min blogg. Hoppas det är ok med en länk http://mickeshobby.blogspot.com/2012/01/megaevent-i-vaxjo-tipshall-mera-bilder.html
UndCon
January 18, 2012 at 09:38 (UTC 2)
Hej!
Det var kul att träffas IRL. Jag ser inga problem att lägga ut text/bild om du vill det.
MVH UndCon