↑ Return to Parts List

Quadcopter I parts

Here I list my parts used for a small lightweight Quadcopter. Part list might change…

So far I have:

Arduino pro mini

Wiimote plus (WMP)

Nunchuck (NCK)

4 Motors:
TURNIGY 2204-14T 19g Outrunner

4 Propellers:
GWS 8*4.3 propellers (all CV rotating) 2 tilted motors

4ESC’s:
TURNIGY Plush 6A /.8bec/6g Speed Controller

Spektrum AR6100 RX

Frame will be made from Balsa wood 5/15mm (medium soft)
glued in a T fashion to make torsionally rigid structure.

UPDATE
The frame was not strong enough -it broke mid air as propellers hit the frame due to bad design of propeller adapters light weight aluminium profiles might do the trick…

I used 3 blade props and they could not be mounted to the motors…

I do not have the ESC/Motors available anymore – they are now indoor foamies (as intended)

2 comments

  1. Piermaria (Perryosio, birillo67)

    Hallo! Why you don’t have the counterclockwise propellers?
    Thanks.
    Perry

  2. undcon.com

    Hello Perry!

    The 8*3.8 is what I had available at home. CCV propellers are hard to get and the shop I wanted to order APC propellers from was out of stock.

    I have ordered 3blade propellers CV and CCV from http://www.hobbycity.com but they have not yet arrived (I think they will arrive today)

    Then I will update the parts list.

    I will order both 8″ and 10″ or 11″ propellers so I can build my outdoor quad as well.

    Best Regards – UndCon

Leave a Reply