Mar 24
I started some work on the Bixler. 2 long screws holds the motor in place – simply undo both and gently pull out the long wires if they are stuck in glue under the motor mount. The 2826 fits if you remove minor parts of the foam. I made a small groove for the wires …
Oct 01
I managed to successfully repair the Arduino pro mini board. A few pins were damaged due to a crash and when they broke off they also removed some of the solder pads. The board was repaired with thin wires soldered directly and then the Quadcopter was reassembled again. A quick test showed right motor was …
Above is one of my playlists on Youtube with some selected highlights. I think I included most of my FPV flights with the Skywalker.
